Product Description
Black, Silver, and Clear Weave Carbon Fiber
The photo on this carbon fiber really does it no justice. This pattern looks great over any color allowing a subtle amount of base to show through.
FIlm Width - 50 Wide (19 inches Wide)
Recommended Base Color - All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Street Graffiti
This hydrographic film brings the street graffiti feel right to your project! This pattern has a tranparent background allowing you to use nearly any base color to fully customize this design.
FIlm Width - 50cm Wide (19 inches Wide)
Recommended Base Color - All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Death By Rose
A beautiful Black and Clear Skull and Rose pattern that just looks sweet! Wtih this water transfer printing pattern you can use nearly any base color to bring it to life.
FIlm Width - 1M Wide (3.2 Feet Wide)
Recommended Base Color - All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Brushed Walnut
A beautiful rich wood grain that is sure to bring life to any of your hydro dipping projects! This film incoporates such nice warm tones while still giving you a more brushed rustic look and feel. You could really transform the look of this hydrographic film by simply changing the base color of this design.
FIlm Width - 50CM (19 inches Wide)
Recommended Base Color - Bright White , Brown, Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Black Walnut
This Black walnut design has so much depth and detail it looks very realistic! This particular water transfer film has a silver backing so the base color will not show through with this design.
FIlm Width - 50CM (19 inches Wide)
Recommended Base Color - Bright White , Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Graveyard Skulls
These skulls are rather large in size but are clear allowing you to use any colors under this hydrographic film. With all the detail in this design you can't go wrong.
FIlm Width - 50CM (19 inches Wide)
Recommended Base Color - All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Hell's Fire and Skulls
Where there are skulls there is almost always fire! A hydrographics design that screams fire while still incorporating the always needed detailed skulls.
FIlm Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
One Eye Charlie
Checkout these kooky skulls - One Eye Charlie (we call him)! A hydrographic skull design sure to scare the crazy out of you.
FIlm Width - 1M (3.2 Feet Wide)
Recommended Base Color - Bright White ,All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Escaping Men
A rather different pattern that at first glances looks like men's faces trying to escape. The closer you look the more you seen that there are hidden deer heads throughout the hydrographic design.
FIlm Width - 50cm (19 inches)
Recommended Base Color - Bright White , Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Carbon Waves
If you like the traditional carbon patterns on the market you might light this twist to the traditional design. This hydrographic film brings the illusion of moving waves but the edgy look of carbon lines.
FIlm Width - 50cm (19 inches)
Recommended Base Color - Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Fight Til The End
A hydrographic film representing present day fighting to protect against the future! The imagery in this pattern is so realistic and detailed.
FIlm Width - 50cm (19 inches)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Gothic Lover
Looking for a hydrographic film incoporating the dark gothic vibe while expressing some major emotion? If so this film is sure to hit the spot. Make a bold statement while using this pattern on any project.
FIlm Width - 50cm (19 inches)
Recommended Base Color - Bright White , Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Blue Fusion Lightning
This fresh new take on the original lightning hydrographic films is amazing! The variations in colors and the depth in this pattern really makes it stand out.
FIlm Width - 50cm (19 inches)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Emojis
We all know that emojis have taken over our lives these days. Who wouldn't like a hydrographic film that represent all of these funny faces we use daily.
FIlm Width - 50cm (19 inches)
Recommended Base Color - Bright White , All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Vice City
A series that will never get old! As many remember this film was designed and based upon the Grand Theft Auto comics.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Toxic Dinos
No hydrographic film selection is complete without bloody gory dinousaurs! This design is sure to turn some heads with it's many dinousaur heads and grouesom detail!
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Motor Mayhem
Hydrographic film great for any motor head or car enthusiast! Incoporating several motor components like spark plugs, pistons, crankshafts while still adding in some crazy spines, hearts, and brains to really add a twist to this design!
Film Width - 1M (3.2 feet wide)
Recommended Base Color - All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
BoneFish Camo
A hydrographic film that brings camo to the sea by incorporating bonefish into a brush camo design! This pattern is very versatile with a clear transparent background allowing you to truly customize this film with any base color.
Film Width - 1M (3.2 feet wide)
Recommended Base Color - Bright White ,All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Safari Camo
This hydrographic Safari Camo colors and design are sure to help you blend in different environments. This film has quickly became a favorite!
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Fire Power
A hydrographic film that features exactly what it says "Fire Power" including several different elements such as firearms and grenades!
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White ,Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Black Tiger
A animal hydro-dipping film that incorporates various stripe combinations to give you that great animal skin appearance that could easily be a tiger or even a zebra. This pattern is black and clear allowing you to use nearly any base color with this hydrographic film.
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Tan Marble
A hydrographic film which incorporates several color palettes to give you great definition! This pattern has so much detail and depth that it could easily be mistaken for real marble or stone.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
THIS LISTING IS FOR A **USED** 60" TANK - THIS IS NOT BEING SOLD BY LIQUID CONCEPTS BUT THROUGH THE CUSTOMER
MADE IN THE U.S.A.
This Liquid Concepts Tank was purchased by our customer in 2014 and has never been used! This is a great tank that has never even been filled with water and made of quality 304 stainless steel throughout. You are getting the same quality tanks that we still offer at a fraction of the cost! Be sure to read up on all the specs of our tanks click here. With this tank you will still receive all of the paint guns listed below and various films. This would make an excellent tank for someone wanting to get into the Hydrographics industry or simply looking to upgrade. You are practically getting a BRAND NEW Liquid Concepts tank that has never been used. As mentioned above we are simply helping the customer advertise the tank for sale and this NOT sold through Liquid Concepts. All pricing, questions, and delivery would need to be done through contacting the direct seller below.
These dimensions are INSIDE dipping area dimensions: 60”x43”x36”
- Various Films
- Activator and Primer HVLP Startingline Devilbiss Kit
- SRI Pro HVLP Paint Gun
- 3M PPS Cups System (2 each PPS Mini Cups and Collars, 50 PPS Mini Lids and Liners, 20 PPS Plugs, 2 PPS Film Inserts and 1 dispenser)
- PPS Cup Adapter for SRI Pro
*Shipping NOT included in tank package price* Tank located in Kansas
Contact Seller with any questions :
Jonathan
785-643-1654
Jonathanw1991@outlook.com
Product Description
Dirt Road Camo Hydrographic Film
.30-06 Outdoors struck out to break the mold by designing a camo that was unlike other camo companies on the market. DRC was designed to work well in most every hunting scenario regardless of the GPS coordinates. Sharp Browns, Cool Greens, Subtle Greys & Blacks are all paired elements against
tree vines, shadows, snake skin, and slate rocks to give a unique twist that will both conceal and look great while doing it!
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
The AP-01 Adhesion Promoter is used to greatly enchance the adhesion on bare plastic material.AP-01 Adhesion Promoter can be applied under primers on flexible and rigid plastic parts to help with adhesion.
Product Description
2 Day Training- This is a group style training and can have up to 6 trainees per class
$700(Total Cost)
Note: A 20% deposit is required to secure your training! The remainder will be due upon arrival to your training date.
This 2 Day training is offered ONCE a month and is a group style training. We limit the number of trainees to 6 to allow enough one on one time with the instructor. With a group setting each person will get the hands on experience in prepping, painting, dipping, touch-ups, clearing, etc. This training is for anyone that is wanting to get started in the hydrographics / dipping industry. Once you have completed this course, you will have a good understanding on the principles of how this process works and a good foundation to build on by using the correct materials, paints, clear coats and much more. We will go over all the steps that are needed to perform the hydrographics on all parts that will come into your shop from wood, plastics, metal, fiberglass, and much more. We will cover different dipping techniques, back-taping, rolling, and more.
We will also show each student how to properly setup your activator gun along with knowing the essentials on how a paint gun works, sprays, and atomizes correctly. Each trainee will have a complete hands on experience for all steps of this process which will include prep work and sanding, painting, mixing paint, priming, dipping, rinsing parts, drying, candy coats, clear coating, buffing, polishing and wet sanding.
This class will start at 8AM and then end at 5PM Saturday and Sunday. This is our ONLY class that is held on the weekend. There will be a 1 hour break for lunch where lunch is provided. After the training is finished, each trainee will receive a certificate of completion to showcase at their shop as well as a seal that can be displayed on your website or any digital media.
Prerequisites- None
What's covered during the training? (Please click here for a detailed list of what is covered in this training)
- How to properly prep different materials
- How to mix paint and other materials
- What paints to use and how to properly apply them
- Proper activator gun setup (you can bring your activator gun if desired)
- All aspects of the hydro-dip process (double dipping, back-taping, rolling, etc.)
- Dipping complex items (dashes, wheels, gunstocks, etc)
- Building and maintaining Jigs for painting and dipping
- Touching up and using an airbrush to fix mistakes and problem areas of the dip
- Applying custom finishes to your work (candy colors, metallics, pearls, glow in the dark, etc)
- How to properly mix and spray clear coat
- How to spray flat and gloss clear
- How to properly buff and polish a part
- How to market your business (including social media, trade shows, email blasts, etc.)
- Customer service tips
- Photography tips to get a professional look
- Film storage and suggestions
- Q&A Session throughout the training
What's included with the training?
- Prepping guide to reference for different types of materials
- List of materials used during training, etc.
- Detailed Liquid Concepts Training pamphlet covering the process from start to finish
- Technical Support for a LIFETIME!
- 100% Hands on Training
- Learning tips and tricks from the pros
- Discounted rates at local hotels for lodging during training
- Lunch is included for all trainees
- 5% OFF all future product purchases
- Training completion certificate
- Training seal for all digital media
- 10 Meters of film of choice (subject to royalty fees, limit of 5 patterns total)
- 1 gallon of Liquid Concepts Activator
Travel Arrangements : If you are flying in, you will need to fly into Little Rock National Airport (LIT). The training facility located in Alexander is approximately 20-30 minutes south of Little Rock. For hotels, you can either stay in Benton or Bryant, AR. which is about 10 minutes away depending on where you stay from our training facility.
Product Description
Custom printed hydrographic Real Fire Candy Blue film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Real Fire Candy Black and Clear film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Real Fire Candy Film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Duck Hunt Camo
Hydro-dipping film that incorporates the right color tones with some grass reeds to really give you the perfect cover during hunting season! This pattern is great in size for smaller or larger items and looks best over our Bright White or Beige base.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Spring Oak Camo
This is a camouflage that really represents the look and feel of the woods during the spring! With its great detail and vibrant colors you it is bound to look great on any project.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Jungle Mosaic
This hydrographic film is so versatile that it could be a camo or just an abstract design! This pattern looks great over our Bright White base color.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Desert Mosaic
This hydrographic film is so versatile that it could be a camo or just an abstract design! Incoporating tans, browns, and even a shade of orange it gives you a desert feel. This pattern looks great over our Bright White base color.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Money Babe
This water transfer printing film is just simply HOT! This pattern incoporates Money, Babes, Tattoos, and more, as well as being black and transparent you can use any color to really make this design pop!
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White , All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Hot Lava
A hydrographic pattern that incoporates such detail and looks like true melting lava! This films looks great over a white but could also use a different base if you wanted.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Rainbow Carbon
Everyone loves some carbon fiber but add in the neon rainbow effect and it is sure to be a show stopper! You have to try this hydrographic film to really see the magic. Use our Silver Metallic base to really make it pop. It also looks good over Bright White
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Rainbow Paisley Skulls
If you are a skull lover and love bright colors Rainbow Paisley Skulls is just what you need! This pattern is non-directional incorporating several neon colors to give you a WILD design. Use our Silver Metallic base to really make it pop. It also looks good over Bright White
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Copper Illusion
A hydrographic film that is unlike any design out there! This design incoporated several colors with an abstract design that looks like it is reflecting from every angle. This design looks great over our silver metallic or bright white paint.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Silver Metallic
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Custom printed hydrographic DTOM USA exclusively at Liquid Concepts! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Large Tribal Indian Skulls
This design incorporates several variations of an Indian Skull to give you a unique design. With the various directions of the skulls it makes it a very versitle design as this film can be used over any base color of your choice. The skulls on this design are slightly larger at about 5.5".
FIlm Width - 50CM (19 inches wide)
Recommended Base Color - All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Black Marble
Get your hands on this classic marble hydrographic pattern with a nice vein structure that really makes the pattern come to life. This is a more traditional marble with just black and clear veins so any base color can be used to change the color of the veins.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - All Colors , Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Brown Marble
With so many hydrographic marble designs on the market we are bound to have the right one for you! This Brown Marble is a more traditional marble with just brown and clear veins so any base color can be used to chage the color of the veins.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - All Colors , Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Macassar Wood
This hydro-dipping design is perfect for you if you are looking for a very high end wood grain finish! This pattern looks great under any lighter base coat to give you a smooth and subtle look that will have any part looking very exotic in no time!
FIlm Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Medium Hickory
This is a normal hickory straight grain hydro film that has a nice warm color and light tan undertone to give your part a great look.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Light Oak
This is a very light oak grain hydrographic film that can be given a different look by simply changing the base color. Wood grains are very common in hydrographic and can be seen everywhere! This is sure to look great on nearly any project.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Light Blonde Straight Grain
This hydrographic film wood grain is very light and subtle giving you a natural looking light wood grain you are sure to love!
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Gunstock Oak
A nice wood grain pattern that gives a nice warm glow to anything it is applied to, while the subtle lines in the design are sure to amaze!
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Red Oak
With the detail and the red hues in this wood grain it really makes this design look distinguished! You can change the look of this hydrographic film by changing the base color.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Warm Oak
This is such an incredible detailed pattern! If you are looking for a nice warm oak design this is sure to win you over!
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White ,Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Brushed Metal
This hydrographic film screams class and safistication! With this design you can get the true look of brushed metal. This film looks the best over light and dark silvers.
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White ,Silver
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Pink Cheetah
Everyone needs a little pink cheetah! This hydro dipping pattern is great for any woman animal lover! Film looks best over a white base color.
FIlm Width - 50cm (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Giraffe Skin
This design is a twist on your traditional giraffe skin design. This animal skin seems to be a combination of a giraffe and a gator skin in design. This pattern is brown and clear so you can use nearly any base color to change the look and feel of this design.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Any Color Can Be Used
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Colorful Leopard
This hydrographic leopard film is not your traditional leopard design! But who wants traditional?!? This film is black and pink in color with a transparent background allowing you to completely change the look of this design.
FIlm Width - 50cm (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Blackened Camo
This camo brings something new to the idea of normal camo designs! With it blackended colors you are sure to have a one of a kind camo design for all of your customers.
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Spring Illusion Camo
Camo will always be a popular design with all of your customers. This hydrographic camo brings some great detail and incorporates some perfect spring colors. Film is best over a white, beige, or tan base color!
FIlm Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White , Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Fall Pine Camo
With its fall colors and sizing this hydrographic camo is great for smaller and larger items.
FIlm Width - 50cm (19 inches wide)
Recommended Base Color - Bright White , Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Deep Woods Camo
Everyone loves camo and this is sure to be hit with your customers! This hydrographic film is very detailed and looks very realistic. This particular camo is a little bigger in size and looks best over white, beige, or tan base color.
FIlm Width - 50cm wide (19 inches wide)
Recommended Base Color - Bright White , Beige
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Chains
This hydrographic film has so much detail and is great in the fact that you can truly change this design up by changing the base color.
Film Width - 50CM (19 inches wide)
Recommended Base Color - All Base Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Colorflauge
This pattern is so different and unique in all of the different colors and design. A hydrographics film that resembles a camouflage design with multiple abstract colors and design.
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Soccer Ball Splash
If you are a soccer ball fan this hydrographic film will be right up your alley! With this film you are able to change the look of the design by simply changing your base color.
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White ,All Base Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Colorful Paisley
With this hydrographic film you are sure to achieve the femine touch! This pattern looks best over a white base color.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Black and Silver Marble
This hydrographic film pattern is black, silver and clear in color. This pattern looks great with nearly any base color behind it!
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Flaming Dice
This flaming dice hydrographic film is sure to catch your eye! With the detail and vibrant colors you can't go wrong.
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Ammo
If you are a gun lover you will enjoy this hydrographic film incoporating several gold bullets. This pattern looks great over a white or silver base color!
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Rusty License Plates
This hydrographic film incoporates several versions of different rustic license plates to give you a vintage look. This pattern looks the best over a white base color.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Patriotic Uncle Sam
Another great twist to a patriotic design. A hydrogaphic film that incoporates uncle sam along with the patriotic red, white, and blue!
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Hip Hop Graffiti
A hydrographic film that incorporates graphics and colors that ring Hip Hop with a twist of stickerbomb effect! This film is bound that make a statement on any item.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
USA America
If you are looking for a truly patriotic hydrographic film the USA America is it! This films incorporates "USA" text as well as waving American Flag. This films looks best over a white base color.
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Mystical Flames
A hydrographic film design that is truly stunning! This film is opaque in some areas allowing you to change the base color of your item to adjust the coloring.
Film Width - 50CM (19 inches wide)
Recommended Base Color - Bright White
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Liquid U Online Training Video
Do you desire professional hydrographic training but lack the means required to travel to attend an in-house training?
We have just what you need! Our new online training video is centered around learning the basic foundation of the entire hydrographics process. Our training video is lead by Bryan Westbrook, one of the top authorities in water transfer printing. Learn what TO and NOT TO do for every step of the hydrographic process.
We have spent numerous hours going into great detail to offer our customers the first ever online training! Nothing will ever beat a hands on training BUT this is the next best thing to commodate your schedule. With this online training video you will receive 2+ hours of video divided into 7 separate section for ease of navigating. The section covers everything from preparation,paints & primers, films, dipping, troubleshooting, clearing etc!
Prerequisites: None
What's included with the training?
- Access to the Video for a LIFETIME!
- Prepping guide to reference for different types of materials
- List of materials used during training, etc.
- Detailed Liquid Concepts Training pamphlet covering the process from start to finish
- Technical Support for a LIFETIME!
- Learning tips and tricks from the pros
- Discounted Rate on In-House training (we offer you a discounted rate if you decide in the future you would like to attend one of our in-house trainings)
Product Description
Skulls Racing
Let's bring out the racer in you! This pattern is black and clear in transparency so you can use any base color to truly make this design one of a kind.
Film Width - 1M (3.2 Feet wide)
Recommended Base Color - Bright White ,All Colors
Recommended Hydrographic Activator - Liquid Concepts Activator
Product Description
Custom printed hydrographic Aluminum Plates film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Tooled Leather film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Volleyballs film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Baseballs film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Junk Food film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Donuts film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Blackberries film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Pumpkins film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Smoke on the Water film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic American Flag and Thin and Blue Line Flag film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Lightning Storm film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Colorful Wiring film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Electric Rainbow film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Mardi Gras Masks film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Mardi Gras Masks film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Mardi Gras Beads film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Mardi Gras Beads film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Brain Neurons film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Brain Neurons film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Brain Neurons film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic We The People Camo film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic US and Gadsden Flag film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic We the People film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Brown Woven Carbon film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Crocodile Skin film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Black Snake Skin film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Black Crocodile film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Alligator Leather Brown film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
Product Description
Custom printed hydrographic Alligator Leather Black film! Can be sized to go on any size object you have.
As with any of our designs/films you can use it on any project you desire.
Please note that because this film is printed differently than traditional water transfer printing film, the decorator may have to adjust settings and techniques to get the best results. Please contact us if you have any questions - 501-455-5500 or info@liquidconcepts.com
**Each Custom Hydrographic Film is sold by 1 Square Meter - 48" Wide x 32" long (10 Square Feet) If ordering more than one meter of film, the film will be a continuous 48" wide roll.**
Please include in the comments section at checkout what scale sizing you would like us to print the pattern for you! For instance is it going on an ATV or a firearm?
Dipping Instructions -
Please see below for basic instructions on how to use these products.
1. Remove paper backing on film – place the film on the table, grab one edge and pull it back across the film opposite of the edge that was started with. **If not done correctly this will cause the backing to possibly stick to the film** PLEASE REFER TO OUR VIDEO ON HOW TO PROPERLY REMOVE THE BACKING - Click Here
2. The side you remove the backing from is the side that goes DOWN on the water.
3. Let the film soak for 60 seconds at 80˚F – 90˚F before activating.
4. Spray your Liquid Concepts activator. We have found the custom film may require less activator than most other patterns.
