There are currently no items in your cart.

Start Shopping

Shopping Cart (0)
Log In Shopping Cart (0)0 Search
Make Sure to Wait Long Enough After Spraying Your Base Coat

Make Sure to Wait Long Enough After Spraying Your Base Coat

Make Sure to Wait Long Enough After Spraying Your Base Coat

Correctly applying your base coat is one of the most crucial of all steps in a hydro dipping project. If you make mistakes, it will end up posing a significant issue later. The base coat is the foundation for your final design.

It is essential to apply the base coat right; you must wait long enough before moving to the next stage and dipping. Indeed, you want the base to remain in place before dipping. Providing a nearly permanent base coat is essential to hydrographics. Make sure the surface dries thoroughly after applying the base coat for best results. This gives you a more durable finish that looks fantastic and will last for years. Dry is always better than wet when you transition from step to step.

Let Your Base Coat Set

You have to wait long enough for the base coat to set, or you will experience problems with the finish. Avoiding problems later is the main reason to be thorough and patient with all aspects of the water transfer printing process. Hydrographics requires using a design strategy to get your details the way that you want them. The base coat color should be white for almost all designs. If you use other colors, they could blend with the ink to create variations in color that may not be desired.

Either way, you need a dry base coat before moving on. It usually won’t take over a few minutes to see the results you desire. You should gently touch a small part of the design if you’re not sure, but be careful not to impact the overall design if you decide on that.

Temperatures Decide on Final Drying Times

If you have a dry room, the coat will dry out fast. With too much humidity, it will take longer. Temperatures as well will impact the dry times. Cooler air temperature will slow down the process significantly. It doesn’t take that long for base coating, but patience is still a must. The same holds as you move your way through the water transfer printing.

What matters most is that the final design meets your artistic objectives and expectations. One tip that works well is to warm up paint before applying it. Simply placing it in a warm room is sufficient to make it looser and easier to be sprayed. Let the paint set in the room until you’re ready to use it, or for around twenty minutes, and then you’ll see the improved performance.

Hydro dipping takes standard printing practices and adapts them to a variety of surfaces. It’s possible to put a unique print on almost any material, but some look better than others. It’s worth checking out tutorials or other learning resources to familiarize yourself with all the essential information you need. Many people who now do this type of work professionally are self-taught.

After you’ve worked once or twice on hydro dipping, you’ll get a feel for precise times for drying. Then, the projects get easier. You may even decide on using one style over another, depending on how the items look.